How to Install My Capsule Dog Water Fountain?

Here is the video link of the installation steps:

Here are the detailed steps you can refer to:

 

1. Soak the filter in a clean bowl for 5 minutes, then rinse the filter thoroughly with tap water.

2. Insert the foam filter into the groove of the water pump. Position the pump according to the bottom slot shape.

3. Insert the water pump's USB cable through the hole at the back of the water tank, starting from the inside and extending outward.

4. Clip the wire into the anti-pull slot and plug the USB into the power adapter.

5. Install the silicone pipe on the pump. Add water to the tank. (The pump will operate automatically when it is placed in the water.)

6. Fit the filter tray onto the bottom of the drainage tray.

7. Place the soaked filter into the filter tray and install the serving tray onto the serving tray base.

8. Install the serving tray, serving tray base, filter, and filter tray into the water tank.